Call us now: 0488 886 255

Curing hot water cylinders

Hot water is an essential part of any home. However, many issues may cause the water not to bring the joy that was meant. Here are some of the issues and some of the possible solutions that can bring back the joy of hot water.

 

What are the possible hot water problems?

 

– No hot water. There might be a problem with the following. Your thermostat might be broken or not functioning. You should also look at the heating element to check whether it is broken.

 

– Inadequate hot water-the water sometimes fails to be hot or not hot as needed. First, check to see if your tank meets the household demands. The tank dip tube meant to take cold water to the bottom of the tank might be broken, thus; the water fails to heat up properly.

 

– Discolored water-many heaters contain a sacrificial anode. This is meant to prevent internal rust, with time, the anode are corroded. If not replaced, the tank will rust and make your water get some colors that may not be pleasant.

 

– Smelling water-It is because of bacteria that react with magnesium or aluminum anodes in the tank. These rods are meant to reduce the level of internal rust. This produces hydrogen sulfide gas that has the smell of rotten eggs.

 

– Odd noises-this comes due to sediments that are at the bottom of the tank. When heating, the sediments vibrate or causes steam to build up. As the steam escapes, bubbles cause some sounds thus odd noises.

 

– Lack of enough pressure-this may be due to the pipes being clogged or the tank not accumulating enough pressure. In addition, the pressure of the main pipes determines the pressure of your hot water.

 

What are the Cures to hot water problems?

 

– Solution to odors-first, notice the source of problems to your water. Turn on the hot and cold water pipes and smell to know the source of the odor. If the cold water pipe has an odor. The tank has no problem, but when the hot water pipe has an odor. The aluminum and the magnesium rods should be changed.

 

– Water taking too hot to heat, first, check the heating elements and see if they are in the correct working condition. Also, check the possibility of sediments at the bottom of the tank.

 

– Rusty colored water, the anode in the water heater keeps the tank from rusting. When the anode is dissolved, clean the tank and replace the anode to avoid the tank from rusting.

 

– Shortage of pressure, if the main pipe is not delivering enough pressure, check to see if the tank is leaking or the main valve is leaking leading to low pressure.

 

– Sediments, if the water in your area has much sediment. It is wise if you cleaned your water tank more regularly.

 

This tips on hot water cylinder problems cures. You will now manage some of the common ones.